DIGITAL PHOTO FRAME
Instruction Manual
JP-127
Please read this manual carefully before operating and save it
for future reference.
Digital Photo Frame
V10M10_IM_EN_12192007
USER SAFETY GUIDE
Important Safety Instructions
1. READ INSTRUCTIONS - All safety and operating
instructions should be read before the appliance is
operated.
2. RETAIN INSTRUCTIONS - The safety and operating
instructions should be retained in a secure place for future
reference.
3. HEED WARNINGS - All warnings on the appliance and in
the operating instructions should be observed.
4. FOLLOW INSTRUCTIONS - All operating and use
instructions should be followed.
5. WATER AND MOISTURE - The appliance should not be
used near water. For example: near a bathtub, kitchen sink,
laundry tub, and/or swimming pool.
6. HEAT - The appliance should be situated away from heat
sources such as radiators, heat registers, stoves, or other
appliances (including amplifiers) that produce heat.
7. POWER SOURCES - The appliance should be connected
to a power supply only of the type described in the
operating instructions or as marked on the appliance.
8. CLEANING - The appliance should only be cleaned with a
dry cloth.
9. OBJECT AND LIQUID ENTRY - Care should be taken so
that objects do not fall and liquids are not spilled into the
device’s openings.
10. CARTS AND STANDS - The appliance
should be used only with a cart or stand that
is recommended by the manufacturer. An
appliance and cart combination should be
moved with care. Quick stops, excessive
force, and uneven surfaces may cause the appliance and
cart combination to overturn causing possible injury to the
user and/or damage to the unit.
- 2 -
Digital Photo Frame
V10M10_IM_EN_12192007
USER SAFETY GUIDE
Important Safety Instructions – Continued
11. DAMAGE REQUIRING SERVICE - The appliance should
be serviced by qualified service professional when:
a. Objects have fallen into, or liquid has been spilled into
the appliance’s apertures.
b. The appliance has been exposed to rain.
c. The appliance has been dropped and suffered damage.
d. The appliance does not appear to operate normally, or
exhibits a change in performance.
12. SERVICING - The user should not attempt to service the
appliance beyond what is described in the user's operating
instructions. All other servicing should be referred to
qualified service professional.
13. LEAD AND MERCURY - This product may contain lead
and/or mercury. Disposal of these materials may be
regulated by your local authorities due to environmental
considerations. For more detailed disposal or recycling
information, please contact your local authorities or the EIA
Additional Safety Instructions
•
When not in use, keep your device in a safe place where it
will not be bent or crushed.
- 3 -
Digital Photo Frame
V10M10_IM_EN_12192007
USER SAFETY GUIDE
FCC Notice to U.S. Users
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation. Refer to 47 CFR Sec. 15.19.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications, which can be determined by turning the
equipment off and on, the user is encouraged to correct the
interference by one or more of the following measures:
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
•
•
Connect the equipment to an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician
for help.
NOTE: Changes or modifications not expressly approved by
the party responsible for compliance could void the user’s
authority to operate the equipment. Refer to 47 CFR Sec.
15.21.
- 4 -
Digital Photo Frame
V10M10_IM_EN_12192007
USER SAFETY GUIDE
Industry Canada Notice to Canadian Users
Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device
must accept any interference received, including interference
that may cause undesired operation of the device. Refer to IC
RSS 210 Sec. 5.11. The term “IC” before the certification or
registration number only means that the registration was
performed based on a Declaration of Conformity and that
Industry Canada technical specifications were met. It does not
imply that Industry Canada (IC) approved this equipment. Refer
to Self-Marking 6(f) and RSP 100 Sec. 4.
- 5 -
Digital Photo Frame
V10M10_IM_EN_12192007
GETTING STARTED
Thank you for purchasing the JP-127. Unpack the unit and make
sure all the accessories are put aside so they will not be lost.
Digital photo frame with 7” TFT LCD
widescreen
•
•
•
Displays digital photos on 7” widescreen
Supports JPEG files
Reads various memory cards, such as SD, MMC, MS,
and MS Pro
•
•
•
•
USB 2.0 host
Supports slideshow with multiple interval times per picture
No computer or Internet required
Rotate / Flip pictures horizontally or vertically
What’s Included
•
•
•
•
•
Digital Photo Frame
AC Adapter
Detachable Stand
Instruction Manual
Warranty Card
- 7 -
Digital Photo Frame
V10M10_IM_EN_12192007
GETTING STARTED
Location of Controls
1
2 3 4 5 6 7 8 9 10
11
- 8 -
Digital Photo Frame
V10M10_IM_EN_12192007
GETTING STARTED
Location of Controls
1.
2.
LCD screen
USB jack
3.
SD/MMC/MS slot
4.
5.
PLAY/SEL/Pause/Confirm button
STOP/Mode button
6.
7.
8.
UP/Rotate button (Rotates images 90º)
DOWN/Brightness button (Adjusts brightness level)
RIGHT/Next button
9.
LEFT/Previous button
10.
11.
Stand connection (Stand included)
DC IN jack
Attaching the Stand
1.
Push the head of
the stand into the
connector on the
back of the frame.
Rotate stand
2.
clockwise until it
locks in place.
Frame can stand
vertically or horizontally.
Connecting the Power
Attach the AC power adapter to the DC in jack on the lower
back of the photo frame and plug the other end into a standard
wall outlet.
- 9 -
Digital Photo Frame
V10M10_IM_EN_12192007
OPERATIONAL INSTRUCTIONS
Using a Memory Card or USB
1.
Insert a memory card (SD/MMC/MS only) into the card
slot on the side of the frame. Be certain to line up the card
correctly as indicated on the slot.
2.
3.
Insert a USB thumb drive into the USB jack on the side of
the frame.
To remove the memory card pull straight out from the slot.
Note: This photo frame can only display JPEG format. If
you wish to display photos from a different digital format,
they must first be converted to JPEG in order to play on
the JP-127.
Setup menu
1.
Press the LEFT/RIGHT button and select
“Setup” from the Main menu.
2.
3.
Press the PLAY/SEL button
Press the UP/DOWN/LEFT/RIGHT
buttons to select an item.
4.
Press the PLAY/SEL button to confirm.
Note: To leave the Setup menu, select “Exit Setup Menu
from the Setup menu or press the MODE button again.
- 10 -
Digital Photo Frame
V10M10_IM_EN_12192007
OPERATIONAL INSTRUCTIONS
Setup Menu-Photo Setting
Interval Time 5 Sec., 15 Sec., 30 Sec., 1 Min., 5 Min., 30
Min., 1 Hour, 4 Hours, 12 Hours, 1 Day
Transition
No Effect, Random, Cover Up; Cover Down,
Uncover Left, Push Right,Wipe Up,Wipe
Down
Contrast
-4, -3, -2, -1, 0, +1, +2, +3, +4
OSD
Language
English, French, German, Italian, Spanish,
Portuguese, Dutch, Polish
Panel
Reset
Full Screen, Original(*)
Confirm (**)
Exit Setup Mode
* Select “Original” for playing a conventional aspect ratio of
images. Black bands appear on left and right screen with a
landscape viewing, or top and bottom with a portrait viewing.
Select “Full Screen” to play the photos in a full screen size.
** Selecting Reset will restore to the default settings.
- 11 -
Digital Photo Frame
V10M10_IM_EN_12192007
OPERATIONAL INSTRUCTIONS
Viewing Photos and Slide Shows
•
Displaying pictures bigger than 480 x 234 will take longer
to load.
•
When the device is not operative for a few seconds, the
screen saver will activate automatically. To stop the
screen saver, press any button on the frame.
Connect the supplied AC adapter to the DC IN jack.
Press the LEFT/RIGHT button to select “Photo” from the
Main menu.
1.
2.
3.
Press the PLAY/SEL button and the slide show will begin
to play.
Note: To pause the slide show, press the PAUSE button.
Thumbnail Mode
1.
Press the MODE button to enter Thumbnail mode.
2.
Press the LEFT/RIGHT button to select the photo you
wish to play.
3.
Press the PLAY/SEL button and the slide show will begin
to play starting with the photo selected.
Note: Press MODE button again to return to the Main
menu.
Rotating the Images
•
Press the LEFT/RIGHT button to select the photo you
wish to rotate and press the Rotate button.
Notes : Each press of the Rotate button will rotate the
photo by 90º clockwise. All rotation effects will be
cancelled when returning to the Main menu.
- 12 -
Digital Photo Frame
V10M10_IM_EN_12192007
TROUBLESHOOTING GUIDE
No image is shown
• AC adapter may not be properly connected. Check to see
that connections are correct and secure on the left side of the
unit and in the wall outlet.
• Be sure the unit is turned ON. Slide the ON/OFF switch to the
ON position.
• Files may not be in JPEG format. This unit only supports
JPEG files.
• Memory card is not inserted. Insert memory card.
• Memory card may not be supported by this unit. Use only SD,
MMC, or MS cards. Use of different may cause damage to
the card or to this unit.
• File may not be on memory card. Make sure image is saved
to memory card and re-insert card.
Image is distorted
• Some viewing modes slightly distort images. Press MODE
button to change display.
• Actual image may be distorted. View image on your computer
to see if it is a distorted image.
Image is inverted
• Image is upside down or sideways. Press the LEFT/RIGHT
[WX] button repeatedly to rotate the image.
- 13 -
Digital Photo Frame
V10M10_IM_EN_12192007
SPECIFICATIONS
•
LCD Panel
o
o
o
Resolution:480 (RGB) x 234
Aspect Ratio: 16:9
Diagonal Size: 7”
•
•
•
•
Inputs & Outputs
o
Power Adapter (DC) Input Jack
Memory Card Type
o
SD, MMC, MS, MS Pro (not included)
Built-In USB port
o
USB 2.0 host
Power Sources
AC Power Adapter
o
ƒ
ƒ
Input (AC): 100-240V 60/50Hz
Output (DC): 5V 1.0A
•
Power Consumption: 3.82W
- 14 -
TEL: 516-626-7188
FAX: 516-626-7105
© 2007 jWIN Electronics Corp. All rights reserved. No
portion of this printed material or product enclosed
herewith including design, shape and graphics, may be
reproduced or transmitted in any form without the
expressed written consent of jWIN Electronics Corp. by
any means, electronic or mechanical, including
photocopying, recording or use of an information
storage and retrieval system. Any unauthorized
distribution or reproduction of this printed material or
product, or any portion thereof, will be prosecuted to
the fullest possible extent of the law.
|