Kodak Film Camera EXR 500T User Manual

TECHNICAL INFORMATION DATA SHEET  
Revised 10-93  
TI2082  
Copyright, Eastman Kodak Company, 1993  
EASTMAN EXR 500T Film 5298  
1) Description  
EASTMAN EXR 500T Film 5298 (35 mm) is a high-speed tungsten-balanced color negative camera film with  
microfine grain, very high sharpness, and high resolving power. It feature wide under and over exposure latitude,  
with whiter whites, and accurate color and flesh-to-neutral reproduction. Enhanced shadow detail provides crisper,  
richer blacks. It also offers improved shadow detail and blacks in telecine transfers. This film reproduces a wide  
range of colors for increased performance in special-effects applications.  
2) Base  
EASTMAN EXR 500T Film 5298 has an acetate safety base with rem-jet backing.  
3) Darkroom Recommendations  
Do not use a safelight. Handle unprocessed film in total darkness.  
4) Storage  
Store unexposed film at 13ºC (55ºF) or lower. For extended storage, store at -18ºC (0ºF) or lower. Process exposed film  
promptly. Store processed film according to the recommendations in NAPM IT9.11-1992: for medium-term storage  
(minimum of ten years), store at 10ºC (50ºF) or lower at a relative humidity of 20 to 30 percent; for extended-term  
storage (for preservation of material having permanent value), store at 2ºC (35ºF) or lower at a relative humidity of 20  
to 30 percent. For active use, store at 25ºC (77ºF) or lower, at a relative humidity of 50 +/- 5 percent. This relates to  
optimized film handling rather than preservation; static, dust-attraction and curl-related problems are generally  
minimized at the higher relative humidity. After usage, the film should be returned to the appropriate medium- or  
long-term storage conditions as soon as possible.  
For more information about medium- and long-term storage, see NAPM IT9.11-1992, and KODAK Publications No.  
H-1, EASTMAN Professional Motion Picture Films (1992 Edition) and No. H-23, The Book of Film Care (1992  
Edition).  
5) Exposure Indexes  
Tungsten (3200K) - 500/28 Daylight1 - 320/26  
Use these indexes with incident- or reflected-light exposure meters and cameras marked for ISO or ASA speeds or  
exposure indexes. These indexes apply for meter readings of average subjects made from the camera position or for  
readings made from a gray card of 18-percent reflectance (such as one of the KODAK Gray Cards, KODAK  
Publication No. R-27) held close to and in front of the subject. For unusually light- or dark-colored subjects, decrease  
or increase the exposure indicated by the meter accordingly.  
1With a KODAK WRATTEN Gelatin Filter No. 85.  
 
Data Sheet—3  
Copyright, Eastman Kodak Company, 1993  
TI2082 Revised 10-93  
Lighting Contrast -  
The recommended ratio of key-light-plus-fill-light to fill light is 2:1 or 3:1. However, you may use 4:1 or greater when  
a particular look is desired.  
8) Reciprocity Characteristics  
You do not need to make any filter corrections or exposure adjustments for exposure times from 1/1000 to 1 second.  
9) Processing  
Most commercial motion-picture laboratories provide a processing service for this film. There are no packaged  
chemicals available for preparing the processing solutions. See KODAK Publication No. H-24.07, Manual for  
Processing EASTMAN Color Films, Process ECN-2 Specifications, Module 7, for more information on the solution  
formulas and the procedure for machine processing these films. Normal processing is recommended for all exposure  
levels of this film.  
10) Identification  
After processing, the product code number 5298 (35 mm) emulsion and roll number identification,  
KEYKODE number, and internal product symbol (T) are visible along the length of the film.  
11) Laboratory Aim Density (LAD)  
To maintain optimum quality and consistency in the final prints, the laboratory must carefully control the color  
timing, printing, and duplicating procedures. To aid in color timing and curve placement, negative originals should be  
timed relative to Laboratory Aim Density (LAD) Control Film supplied by Eastman Kodak Company.2 The LAD  
Control Film provides both objective sensitometric control and subjective verification of the duplicating procedures  
used by the laboratory.  
In the LAD Control Method,3 the electronic color analyzer used for color timing is set-up with the LAD Control Film  
to produce a gray video display of the LAD patch, corresponding to 1.0 neutral density (gray) on the print. The  
negative printing original is then scene-to-scene timed. There are specific LAD values for each type of print or  
duplicating film that the original can be printed on. For print films, the LAD patch is printed to a neutral gray of 1.0  
visual density. For duplicating films, the specified aims are at the center of the usable straight-line portion of the  
sensitometric curve of the film.  
12) Film-To-Video Transfers  
When you transfer the film directly to video, you can set up the telecine using the negative Telecine Analysis Film  
(TAF) supplied by EASTMAN Kodak Company. The TAF consists of a neutral density scale and an eight-bar color  
test pattern with a LAD gray surround.  
The TAF gray scale provides the telecine operator (colorist) with an effective way to adjust subcarrier balance and to  
center the telecine controls before timing and transferring a film. The TAF color bars provide the utility of electronic  
color bars, even though they do not precisely match the electronically generated color bars. Using the TAF will help  
obtain optimum quality and consistency in the film-to-video transfer. For more information regarding TAF, see  
KODAK Publication No. H-9, TAF User's Guide.  
2Direct any inquiries to one of the regional sales offices.  
3Use of the LAD Control Method is described in the paper, "A Simplified Motion-Picture Laboratory Control Method for  
Improved Color Duplication," by John P. Pytlak and Alfred W. Fleischer in the October 1976 SMPTE Journal.  
 
Data Sheet—4  
Copyright, Eastman Kodak Company, 1993  
TI2082 Revised 10-93  
13) Image Structure  
The modulation-transfer curves, the diffuse rms granularity, and the resolving-power data were generated from  
samples of 5298 Film exposed with tungsten light and processed as recommended in Process ECN-2 chemicals. For  
more information on image-structure characteristics, see KODAK Publication No. H-1, EASTMAN Professional  
Motion Picture Films.  
rms Granularity -  
Refer to curve.  
Read with a microdensitometer, (red, green, blue) using a 48-micrometre aperture.  
Resolving Power -  
ISO RPL  
ISO RP  
50 lines/mm  
(TOC 1.6:1)  
100 lines/mm  
(TOC 1000:1)  
Determined according to a method similar to the one described in ISO 6328-1982, Photography—Photographic  
Materials-Determination of ISO Resolving Power.  
14) Available Roll Lengths  
For information on film roll lengths, check Kodak's Motion Picture Films for Professional Use price catalog or see a  
Kodak sales representative in your country.  
15) Graphs4  
MTF  
a) (9-93)  
NOTE: These photographic modulation-transfer values were determined by using a method similar to the one  
described in ANSI Standard PH2.39-1977(R1984). The film was exposed with the specified illuminant to spatially  
varying sinusoidal test patterns having an aerial image modulation of a nominal 60 percent at the image plane,  
with processing as indicated. In most cases, the photographic modulation-transfer values are influenced by  
development-adjacency effects and are not equivalent to the true optical modulation-transfer curve of the emulsion  
layer in the particular photographic product.  
Characteristic  
b) (9-93)  
Spectral Sensitivity  
c) (9-93)  
Spectral Dye Density  
d) (9-93)  
4NOTICE: While the data presented are typical of production coatings, they do not represent standards that must be met by  
Kodak. Varying storage, exposure, and processing conditions will affect results. The company reserves the right to change  
and improve product characteristics at any time.  
 
Data Sheet—5  
Copyright, Eastman Kodak Company, 1993  
TI2082 Revised 10-93  
Granularity  
e) (9-93)  
NOTE: The Kodak materials described in this publication for use with EASTMAN EXR 500T Film 5298  
are available from dealers who supply Kodak products. You can use other materials, but you may not obtain  
similar results.  
The contents of this publication are subject to change without notice.  
Kodak, Eastman, 5298, Keykode, EXR and Wratten are trademarks.  
Professional Motion Imaging  
EASTMAN KODAK COMPANY - Rochester, NY 14650  
End of Data Sheet  
 
Data Sheet—6  
Copyright, Eastman Kodak Company, 1993  
TI2082 Revised 10-93  
 
Data Sheet—7  
Copyright, Eastman Kodak Company, 1993  
TI2082 Revised 10-93  
 
Data Sheet—8  
Copyright, Eastman Kodak Company, 1993  
TI2082 Revised 10-93  
 
Data Sheet—9  
Copyright, Eastman Kodak Company, 1993  
TI2082 Revised 10-93  
 
Data Sheet—10  
Copyright, Eastman Kodak Company, 1993  
TI2082 Revised 10-93  
 

Indesit Dishwasher D 66 User Manual
Inter Tel PDAs Smartphones 8601 User Manual
JBL Speaker HT4HN User Manual
John Deere Network Cables PFP11260 User Manual
JVC Blu ray Player HR DVS1MS User Manual
Kenwood Stereo Amplifier KAC 526 User Manual
Kenwood Two Way Radio TK 5400 User Manual
KitchenAid Power Hammer CMO 2743 User Manual
Kodak Battery Charger K620E User Manual
Kramer Electronics Switch VS 42H User Manual