JVC CD Player XL V230BK User Manual

COMPACT COMPONENT SYSTEM  
COMPACT DISC PLAYER  
XL-V130BK/XL-V230BK  
XL-V130BK  
XL-V130 COMPACT DISC PLAYER  
STANDBY  
OPEN  
/
CLOSE  
STOP/CLEAR  
PLAY / PAUSE  
/
/
STANDBY/ON  
1
6
2
7
3
8
4
9
5
PROGRAM  
RANDOM  
REPEAT  
CANCEL  
10  
+10  
P
E
M
D
D
CONVERTER CONVERTER  
Pulse Edge Modulation Differential Linearity Errorless D/A Converter  
XL-V230BK  
CANCEL RANDOM  
PROGRAM  
OPEN  
/
1
4
8
2
5
9
3
6
CLOSE  
7
'
10  
+10  
XL-V230 COMPACT DISC PLAYER  
STANDBY  
OPEN  
/
CLOSE  
STOP/CLEAR  
PLAY PAUSE  
/
SEARCH  
AUTO SEARCH  
INDEX  
/
CHECK  
/
/
STANDBY/ON  
REPEAT DISPLAY  
ALL  
/
1
MODE  
1
6
2
3
4
9
5
COMPACT  
DIGITAL AUDIO  
RM-SX230EU REMOTE CONTROL  
PROGRAM  
RANDOM  
REPEAT  
CANCEL  
7
8
10  
+10  
P
E
M
D
D
CONVERTER CONVERTER  
Pulse Edge Modulation Differential Linearity Errorless D/A Converter  
INSTRUCTIONS  
For Customer Use:  
Enter below the Model No. and Serial  
No. which are located either on the rear,  
bottom or side of the cabinet. Retain this  
information for future reference.  
Model No.  
Serial No.  
LET0029-001A  
[BS]  
 
We would like to thank you for purchasing one of our JVC  
products.  
Before connecting this unit to the wall outlet, please read  
the instructions carefully to ensure that you obtain the  
best possible performance.  
Table of contents  
INTRODUCTION................................................ 1  
Precautions .................................................................1  
About this manual .......................................................1  
Names of buttons........................................................2  
If you have any questions, please consult your JVC  
dealer.  
BEFORE USING FOR THE FIRST TIME .......... 4  
Installing the unit .........................................................4  
Connecting to other equipments ................................4  
Supplying the power .................................................. 5  
To connect the AC power cord of the main unit ............ 5  
Installing the batteries.................................................6  
To install the batteries in the remote control unit ........... 6  
COMPU LINK connection...................................................... 6  
BASIC OPERATIONS ....................................... 7  
Basic functions for disc playback...............................7  
Turning on the power of this unit .................................... 7  
Loading a disc in the disc tray ....................................... 7  
Remote control operation ............................................... 7  
Playing a disc ................................................................. 8  
Stopping playback ......................................................... 8  
Locating a point to start playback ..............................8  
Skipping to a desired track ............................................ 8  
Skipping to a desired index ........................................... 8  
Searching for a desired section ..................................... 9  
Specifying a desired track ............................................. 9  
Displaying the time .....................................................9  
Switching the time display on XL-V230BK ..................... 9  
Displaying the time on XL-V130BK ................................ 9  
VARIOUS PLAYBACK PATTERNS ............... 10  
Playing tracks in a desired order .............................. 10  
Playing tracks in a random order.............................. 10  
Playing repeatedly .................................................... 11  
Repeating whole disc................................................... 11  
Repeating one track ..................................................... 11  
GENERAL INFORMATIONS ........................... 12  
COMPU LINK remote control system ....................... 12  
Care and handling .................................................... 13  
Troubleshooting ........................................................ 14  
Specifications............................................................ 15  
 
INTRODUCTION  
Precautions  
About this manual  
This manual covers the operating instructions for the compact disc  
player XL-V130BK and XL-V230BK.  
Load compact disc only  
Never insert anything other than a compact disc into any part of the  
There are several functions which require separate instructions for  
eachmodel. Pleasecheckthemodelnumberstatedonthecartonbox,  
and follow the descriptions applicable to your unit.  
player.  
If a problem persists  
If something goes wrong, turn off the power immediately. If the same  
problem reoccurs when the power is turned on once more, turn off the  
power again and consult your JVC dealer.  
This manual is organized as follows:  
The first part, “INTRODUCTION”, gives you the precautions when  
using this unit, and shows you the names of buttons on the main unit  
and the remote control unit.  
Handling the power cord  
When unplugging from the wall socket, always pull the plug body,  
never the power cable.  
The second part, “BEFORE USING FOR THE FIRST TIME”, tells you  
what kind of operations you should do before playing a disc. This part  
describes where to place the unit for best results, how to install  
batteries in the remote control unit and how to connect this unit to the  
amplifier/receiver and other components.  
Volume settings  
A CD player has almost zero background noise. Because of this, the  
technique of listening to the background level and then setting the  
volume before the music starts, as used with analog turntables or tape  
decks, cannot be used. If you raise the volume level too high, speaker  
damage may result.  
The third part, “BASIC OPERATIONS”, describes how to load a disc,  
and convenient basic functions for playing disc.  
Condensation  
The CD player uses optical components. If it is moved from a cold  
location to a warm one, or is used in a room subject to excessive  
humidity or where a fire has just been lit, condensation could form on  
the optical components.  
This may prevent the laser beam from being properly transmitted and  
thus causes noise or even a malfunction.  
If condensation has formed and the CD player does not function  
correctly, we recommend that you leave it turned on for an hour or two.  
If at the end of this time the CD player still does not function properly,  
please consult your JVC dealer.  
The fourth part, “VARIOUS PLAYBACK PATTERNS”, describes vari-  
ous functions for playing disc, and convenient functions for recording.  
The fifth part, “GENERAL INFORMATIONS”, describes the COMPU  
LINK remote control system which facilitates various operations be-  
tween JVC components, and explains how to take care of discs.  
This part also includes “Troubleshooting” which tells you how to check  
the unit when a malfunction occurs, and the technical informations  
regarding this unit.  
Transporting the unit  
When carrying this unit, it is best to avoid either tilting it or turning it  
upside-down. Where you cannot avoid doing so, please remove the  
disc first.  
Using compact discs  
Compact discs are made of plastic and can be easily damaged. If the  
disc is dirty, scratched, warped or otherwise damaged, the digital  
information may not be picked up correctly.  
Applicable discs  
This unit can only be used with compact discs bearing the mark below.  
Never use discs of other types.  
'
Page 1  
 
INTRODUCTION  
Names of buttons  
Main unit  
4 ¢ AUTO SEARCH/CHECK buttons  
22 33 SEARCH buttons  
: (STANDBY ON) button  
3/8 PLAY/PAUSE  
button  
STANDBY  
indicator  
0 OPEN/CLOSE button  
Disc tray  
7 STOP/CLEAR  
button  
XL-V230 COMPACT DISC PLAYER  
STANDBY  
PLAY / PAUSE  
OPEN  
/
CLOSE  
STOP/CLEAR  
/
/
STANDBY/ON  
1
6
2
7
3
8
4
5
PROGRAM  
RANDOM  
REPEAT  
CANCEL  
9
10  
+10  
P
E
M
D
D
CONVERTER CONVERTER  
Pulse Edge Modulation Differential Linearity Errorless D/A Converter  
remote sensor  
(XL-V230BK Only)  
Display window  
Numeric keypad  
CANCEL button  
REPEAT button  
RANDOM button  
random play back button  
PROGRAM button  
AC power cord inlet  
OUTPUT jacks  
COMPULINK-3  
(SYNCHRO)  
OUTPUT  
AC POWER CORD  
LEFT  
RIGHT  
COMPULINK-3(SYNCHRO)jacks  
Page 2  
 
INTRODUCTION  
Remote control unit (XL-V230BK only)  
Remote control signal  
transmitter  
CANCEL button  
RANDOM: random  
playback button  
CANCEL RANDOM  
PROGRAM  
PROGRAM button  
: STANDBY/ON button  
OPEN/CLOSE button  
OPEN /  
CLOSE  
1
4
8
2
5
9
3
6
7
Numeric keypad  
10  
+10  
8: Pause button  
3: Play button  
7: Stop button  
SEARCH  
AUTO SEARCH / CHECK  
INDEX  
1/¡ SEARCH buttons  
REPEAT ALL/1 button  
4/¢ AUTO SEARCH/CHECK buttons  
ø/Ø INDEX buttons  
REPEAT DISPLAY  
ALL / 1  
MODE  
DISPLAY MODE:  
switching time dis-  
play button  
COMPACT  
DIGITAL AUDIO  
RM-SX230EU REMOTE CONTROL  
Page 3  
 
BEFORE USING FOR THE FIRST TIME  
Connecting to other  
equipments  
Installing the unit  
Connecting to an amplifier or receiver allows you to listen to the sound  
from the speakers.  
Connect the OUTPUT jacks of this unit to the line input jacks of an  
amplifier or receiver with the supplied audio cord.  
Best location  
Select a location which is level, dry and neither too cold nor too hot  
(temperature range 5°C (41°F) to 35°C (95°F)). Also, avoid dusty  
locations or any location subject to vibration.  
Notes  
÷
If interference occurs  
Never connect the OUTPUT jacks to the PHONO jacks of the  
amplifier or receiver. This may cause damage to the components.  
Make sure that the same channels are connected between this unit  
and the amplifier or receiver: LEFT to LEFT and RIGHT to RIGHT.  
Do not connect the power plug until all connections are complete.  
Connect the plugs firmly. Loose connections may cause noise or  
malfunction.  
If this equipment is placed near a tuner or a radio receiver tuned to AM  
frequencies, interference may occur. If this happens, we recommend  
either that you move this unit as far away as possible from the tuner or  
receiver or briefly turn off the power to this unit.  
÷
÷
÷
Rear panel of this unit  
COMPULINK-3  
SYNCHRO  
OUTPUT  
LEFT  
AC POWER CORD  
RIGHT  
Amplifier or receiver  
Audio cord  
OUTPUT  
LEFT  
RIGHT  
Speaker unit  
Page 4  
 
BEFORE USING FOR THE FIRST TIME  
Supplying the power  
To connect the AC power cord of the  
main unit  
The AC power cord is supplied separately and must be connected to  
the unit.  
Plug the AC power cord into the AC POWER CORD inlet of this unit and  
connect to the wall outlet after all connections are complete.  
Note  
When using the COMPU LINK Remote Control System, do not connect  
the power cord to the SWITCHED AC OUTLET of an amplifier or  
receiver.  
AC power cord inlet  
Rear panel of this unit  
COMPULINK-3  
(SYNCHRO)  
OUTPUT  
AC POWER CORD  
LEFT  
RIGHT  
Supplied AC power  
cord  
To the wall outlet  
Page 5  
 
BEFORE USING FOR THE FIRST TIME  
COMPU LINK connection  
Installing the batteries  
(XL-V230BK Only)  
JVC’s COMPU LINK Remote Control System provides unified control  
over system components connected with COMPU LINK. Connecting  
JVC audio components with the COMPU LINK jacks automatically  
controls relative operations between components and facilitates vari-  
ous operations. With the COMPU LINK connection to an amplifier or  
receiver, you can operate XL-V130BK/XL-V230BK with the amplifier or  
receiver’s remote control unit. Synchronized recording is also avail-  
able with this feature.  
To install the batteries in the remote  
control unit  
Before operating the remote control unit, install two batteries.  
1. Remove the rear cover of the remote control unit by pressing  
down and simultaneously pulling it backwards.  
Connecting the COMPU LINK cord  
The COMPU LINK-3 SYNCHRO jacks are used to output and input the  
control signal for the COMPU LINK remote control system.  
COMPULINK-compatibleproductsareprovidedwiththejacksmarked  
COMPU LINK-1, COMPU LINK-2 or COMPU LINK-3, referring to the  
COMPU LINK version. XL-V130BK/XL-V230BK is equipped with  
COMPU LINK-3. You can connect XL-V130BK/XL-V230BK also to a  
component with a lower COMPU LINK versions. But, in that case, only  
the lower versions’ features will be available.  
PlugthesuppliedCOMPULINKcordintotheCOMPULINK-3SYNCHRO  
jack on the rear panel of XL-V130BK/XL-V230BK. Plug the other end  
into the COMPU LINK jack of the other component. If there are two  
COMPU LINK jacks, plug it into either of them.  
2. Install batteries. Be sure that the batteries are installed with  
correct polarity, (+) and (–).  
ConnectingtheCOMPULINKsystemcomponentswiththeCOMPU  
LINK cords  
Supplied COMPU LINK cord  
3. Attach the rear cover by sliding it back into position.  
Cassette deck  
Turntable  
CD player  
Amplifier or receiver  
Notes  
Incorrect use of batteries can cause corrosion or damage. Note the  
following points to lengthen battery life.  
÷
÷
÷
Install batteries observing the correct polarity, (+) and (–).  
Do not use new and old batteries simultaneously.  
Batteries with similar shapes may have different voltage ratings. Be  
sure to use the correct batteries.  
÷
÷
Remove batteries from the remote control unit if it will not be used  
for a long period of time.  
Do not expose batteries to heat or flame.  
Battery replacement  
Service life of batteries depends on the condition of use; standard life  
is about one year. When the batteries become weak, the operating  
distance of the remote control unit becomes short . If this happens,  
replace the batteries R03(UM-4)/AAA(24F) with new ones.  
Note  
÷
The lower the temperature, the shorter the battery life.  
Page 6  
 
BASIC OPERATIONS  
Basic functions for disc  
playback  
Turning on the power of this unit  
Loading a disc in the disc tray  
Press the  
(STANDBY/ON) button to turn on this unit. The  
Use the 0 OPEN/CLOSE button to open and close the disc tray.  
STANDBY indicator is turned off and the display is turned on.  
Remote control unit  
(XL-V230BK ONLY)  
Main unit  
Remote control unit  
(XL-V230BK ONLY)  
Main unit  
OPEN/CLOSE  
OPEN/  
CLOSE  
STANDBY  
0
STANBY/ON  
1. Open the disc tray by pressing the 0 OPEN/CLOSE button.  
Press again to turn the power off and activate the standby mode. The  
STANDBY indicator is lit.  
2. Place a disc on the disc tray according to the groove with its  
label side up.  
The power is automatically turned on also by;  
3. Close the disc tray by pressing the 0 OPEN/CLOSE button.  
÷
÷
Pressing the 0 OPEN/CLOSE button.  
Pressing the 3 button on the remote control unit or the 3/8 PLAY/  
PAUSE button on the main unit.  
Note  
÷
Whenloadingadiscinthedisctray, besuretoputthediscaccording  
to the groove. Otherwise, the disc will be damaged when the disc  
tray is closed, and the disc cannot be removed from the unit.  
Notes  
÷
A small amount of power (4 watts) is consumed even in the standby  
mode.  
Good  
No Good  
÷
Toturnthepoweroffcompletely, disconnectthepowercordfromthe  
wall outlet.  
Compact disc  
Disc tray  
Main unit  
Remote control operation (XL-V230BK Only)  
Point the remote control unit towards the remote sensor and operate it  
steadily and carefully. The remote control unit can be used within a  
rangeofabout7meters(23feet)fromtheremotesensor, andatangles  
of up to about 30 degrees.  
Page 7  
 
BASIC OPERATIONS  
Locating a point to start  
playback  
Skipping to a desired track  
Playing a disc  
Use the 4/¢ buttons.  
Press the 3 button on the remote control unit or the 3/8 PLAY/  
PAUSE button on the main unit.  
Remote control unit  
Main unit  
(XL-V230BK ONLY)  
Main unit  
Remote control unit  
(XL-V230BK ONLY)  
AUTO SEARCH/CHECK  
PLAY/PAUSE  
4
¢
6
To skip back to the beginning of the track being played, tap the 4  
button. Whenthebeginningofthetrackisreached, tappingthisbutton  
again skips to the previous track.  
The 3 indicator lights on the display and playback starts.  
When no disc is loaded in the unit, the disc tray opens.  
To skip to the next track, tap the ¢ button.  
When using the 4 ¢ buttons on the main unit, tap them until the  
desired track appears.  
To stop playback temporarily, press the 8 button on the remote control  
unit or the 3/8 PLAY/PAUSE button on the main unit.  
The 8 indicator lights on the display and playback stops temporarily.  
To resume playback, press the 3 button on the remote control unit or  
the 3/8 PLAY/PAUSE button on the main unit.  
Skipping to a desired index (XL-V230BK Only)  
Stopping playback  
(for a disc with INDEX)  
Press the 7 button.  
Use the ø/Ø INDEX buttons.  
Main unit  
Remote control unit  
(XL-V230BK ONLY)  
Remote control unit  
STOP/CLEAR  
INDEX  
ø
Ø
To skip back to the beginning of the index being played, tap the ø  
INDEX button. When the beginning of the index is reached, tapping  
this button again skips to the previous index.  
To skip to the next index, tap the Ø INDEX button.  
Page 8  
 
BASIC OPERATIONS  
Displaying the time  
Swithching the time display on XL-V230BK  
Searching for a desired section  
Each time the DISPLAY MODE button is pressed, the time display  
changes as the following.  
Keep the 1/¡ SEARCH buttons on the remote control unit or  
the 22 /33 SEARCH buttons on the main unit pressed during  
playback.  
Remote control unit  
DISPLAY  
Remote control unit  
(XL-V230BK ONLY)  
SEARCH  
Main unit  
1
¡
MO
EACH = EACH REMAIN = TOTAL  
TOTAL REMAIN  
=
The corresponding indicator lights in each time mode.  
EACH: Shows the elapsed time of the track being played.  
EACHREMAIN:Showstheremainingplaybacktimeofthetrackbeing  
played.  
TOTAL: Shows the total playing time of the disc being played.  
TOTALREMAIN:Showstheremainingplaybacktimeofthediscbeing  
played.  
Playback advances or reverses rapidly.  
While the 1 button is kept pressed, playback rapidly reverses  
toward the beginning of the track. While the ¡ button is kept  
pressed, playback rapidly advances toward the end of the track.  
When the desired section is reached, release the button. The player  
resumes normal playback from that point.  
Note  
Two speeds are available for fast forward and fast backward.  
Pressing and holding the button provides the faster speed.  
Displaying the time on XL-V130BK  
The XL-V130BK has the following time displays.  
Specifying a desired track  
EACH: Shows the elapsed time of the track being played.  
EACHREMAIN:Showstheremainingplaybacktimeofthetrackbeing  
played.  
To specify the desired track number, use the numeric keypad (1-  
10, +10).  
Remote control unit  
TOTAL: Shows the total playing time of the disc being played.  
Main unit  
1
(XL-V230BK ONLY)  
1
4
8
2
5
9
3
2
7
3
8
4
9
5
6
10  
+10  
6
7
10  
+10  
The unit searches for the selected track and playback starts automati-  
cally.  
When selecting track number 10 or less, press the corresponding  
numeric button. When selecting track number 11 or above, use the  
[+10] button.  
Example: To select track number 12, press [+10] and then [2].  
To select track number 25, press [+10] twice and then [5].  
To select track number 30, press [+10] twice and then [10].  
Note  
The track number which does not exist on the selected disc, cannot be  
selected.  
Page 9  
 
VARIOUS PLAYBACK PATTERNS  
Playing tracks in a  
desired order  
Playing tracks in a  
random order  
You can select and play tracks in a random order.  
Selections are made so that each track in the disc is played only  
once.  
You can play only the favorite tracks in any desired order.  
CANCEL  
PROGRAM  
RANDOM  
main unit  
Numeric keypad  
3 PLAY  
RANDAM  
PLAY  
3
PROGRAM  
main unit  
XL-V230 COMPACT DISC PLAYER  
STANDBY  
OPEN  
/
CLOSE  
STOP/CLEAR  
PLAY / PAUSE  
/
/
STANDBY/ON  
1. Press the RANDOM button so that the "RANDOM" indicator  
lights on the display.  
1
6
2
7
3
8
4
9
5
PROGRAM  
RANDOM  
REPEAT  
CANCEL  
10  
+10  
P
E
M
D
D
CONVERTER CONVERTER  
Pulse Edge Modulation Differential Linearity Errorless D/A Converter  
÷
To skip to the track to be played next, press the ¢ button.  
Numeric keypad  
To exit random playback  
CANCEL  
Press the stop button,and the random mode is cancelled.  
1. In stop mode, press the PRAGRAM button so that "PRGM"  
lights on the display.  
2. Select the track number with the numeric keypad.  
Refer to “Specifying a desired track” on page 9 for entering the  
track number.  
The selected track number is programmed and the following  
display appears.  
Display shows the track  
number selected for step 1.  
STEP  
TOTAL  
PRGM  
9
÷
If you want to cancel the displayed program step, press the  
CANCEL button and then enter the new track number.  
3. Repeat step 2 for other tracks to be programmed.  
You can program up to 32 tracks.  
4. Start playback by pressing the 3 button.  
The programmed tracks are played in the programmed order.  
÷
÷
You can skip to a desired program step with the4 or ¢ button.  
You can add tracks in the program during the playback.  
To check the program contents  
Press the 4 or ¢ button during stop mode. Each time the 4 or  
¢ button is pressed, the program contents are displayed in the  
programmed order or the reverse order.  
To clear the entire program  
In stop mode, press the 7 STOP/CLEAR button on the main unit. The  
program contents will be cleared, however, the program mode is not  
canceled.  
To exit program mode  
Press the PROGRAM button again, and the program mode is can-  
Page 10  
celled.  
 
VARIOUS PLAYBACK PATTERNS  
Playing repeatedly  
You can repeatedly play the whole disc or one track.  
It is also possible to utilize this function in combination with  
random/program playback function.  
main unit  
REPEAT  
REPEAT ALL/1  
Repeating whole disc  
Press the REPEAT (ALL/1) button so that the REPEAT indicator  
lights on the display.  
All tracks are played repeatedly.  
Repeating one track  
Press the REPEAT (ALL/1) button so that the REPEAT 1 indicator  
lights on the display.  
The displayed track is played repeatedly.  
To cancel repeat mode  
Press the REPEAT (ALL/1) button so that the REPEAT and REPEAT 1  
indicators go out.  
Page 11  
 
GENERAL INFORMATIONS  
COMPU LINK remote  
control system  
The COMPU LINK Remote Control System controls relative  
operations between components automatically and facilitates  
various operations.  
Automatic source selection  
When the supplied COMPU LINK cord is utilized to connect this unit to  
others equipped with COMPU LINK jacks, switching-in of each system  
component can be performed with a single touch on the source  
selector button located on a JVC amplifier or receiver.  
Whenselectioniscarriedoutinthismanner, thecorrespondingunitwill  
automatically start operation.  
This is a system originated and developed by JVC for facilitating  
various system operations.  
Upon pressing of the play button, the source selector of the amplifier  
or receiver changes automatically. When a new unit is switched in, the  
previously selected component stops operation within five seconds.  
The following is a brief explanation of this system:  
Synchronized recording  
Synchronized recording refers to the process in which a JVC cassette  
deck starts recording, synchronized with this unit. Synchronized  
recording is carried out as follows:  
1. Set the cassette deck to the recording pause mode in accordance  
with its instructions.  
2. To record only certain tracks, program the tracks in any order, as  
desired.  
3. Press the 3/8 PLAY/ PAUSE button on the front panel of this unit.  
The cassette deck automatically starts recording, synchronized  
with this unit.  
Notes  
÷
÷
÷
÷
Synchronized recording stops automatically when this unit stops  
playback.  
To cancel synchronized recording, press the 7STOP button of this  
unit or the cassette deck.  
To properly operate the synchronized recording, the buttons/con-  
trols other than POWER, 7 STOP and OPEN do not function.  
If the recording pause mode is set on the cassette deck by pressing  
the 8 PAUSE button after pressing the REC and 3 PLAY buttons  
simultaneously, synchronized recording is not possible. For details,  
refer to the instructions for the cassette deck.  
Automatic power on/off function  
This function is to control the power on/off of the receiver/amplifier or  
this unit respectively as the following.  
÷
÷
When this unit enters playback mode, the power of the receiver or  
amplifier is turned on.  
When the source selector of the receiver/amplifier is set to CD  
function mode, the power of this unit is turned on.  
Notes  
÷
Abnormaloperationmayresultifthepowersupplyofthecomponent(s)  
is interrupted. If this happens, you must start over again.  
Ensure that the COMPU LINK jacks of the each component are  
connected with the supplied COMPU LINK cord. Also, be sure to  
fully read the instructions for each component.  
÷
÷
When the power of the amplifier or receiver is switched off, this unit  
is also turned off automatically.  
Page 12  
 
GENERAL INFORMATIONS  
Care and handling  
Maintenance of discs  
How to handle CDs  
When there are fingerprints or other dirt adhering to a disc, wipe the  
disc with a soft, dry cloth with a movement going from the inside  
outwards.  
If difficult to clean, wipe the disc with a cloth moistened with water.  
Never use record cleaners, petrol, alcohol or any anti-static agents.  
When handling compact discs, do not touch the surface of the disc (re-  
flective silver side - the side without the label).  
Since compact discs are made of plastic, they are easily damaged. If  
the disc gets dirty, dusty, scratched or warped, the sound will not be  
picked up correctly and, in addition, such discs may cause the CD  
player to malfunction.  
Even on label side  
Do not damage the label side, stick paper to or use any adhesive on  
this surface.  
Storage  
Make sure that discs are kept in their cases. If discs are piled one on  
top of another without their protective cases, they can be damaged.  
Do not put discs in any location where they can be exposed to direct  
sunlight - or in any place where humidity or temperature is high. Avoid  
leaving discs in your car!  
Page 13  
 
GENERAL INFORMATIONS  
Troubleshooting  
What appears to be a malfunction may not always be serious. Please go through the following list before requesting service.  
Symptom  
Possible cause  
Remedy  
The unit is not operative.  
Power plug is disconnected from the AC  
outlet.  
Connect the plug to an AC outlet.  
The AC power cord plug is disconnected  
from the AC power cord inlet of this unit.  
Connect the plug to an AC power  
cord inlet.  
Disc is not loaded.  
Load a disc in the disc tray.  
Replace both batteries.  
Remove the obstacle.  
The remote control unit does not function.  
(XL-V230BK only)  
Batteries are exhausted.  
There is an obstacle between remote control  
unit and the remote sensor of the main unit.  
Direct sunlight shines on the remote sensor  
of the main unit.  
Shade the unit from the direct sunlight.  
Disc is inserted upside down.  
Disc is not loaded in the correct position.  
Moisture is condensed inside the unit.  
Disc is dirty.  
Load a disc with its label-side up in the  
disc tray.  
Playback is not possible.  
Load the disc according to the groove of  
the disc tray.  
Leave the unit turned on until the mois-  
ture evaporates.  
Wipe off the disc surface with a soft  
cloth.  
The reproduced sound includes noise.  
The sound is intermittent.  
Disc is warped.  
Replace the disc with a new one.  
Replace the disc with a new one.  
Disc is scratched.  
Page 14  
 
GENERAL INFORMATIONS  
Specifications  
General  
System:  
Compact disc player  
Signal detection system: Non-contact optical system  
Sampling frequency:  
Power requirements  
Power consumption:  
44.1 kHz  
AC 230 V , 50Hz  
10watts (POWER ON)  
4 watts (STANDBY)  
435 x 101 x 281 mm  
3.3 kg  
Dimensions (W x H x D):  
Mass:  
Audio performance  
Frequency response:  
Dynamic range:  
2 Hz to 20,000 Hz (±1 dB)  
More than 98 dB (at 1 kHz)  
More than 106 dB  
Signal to noise ratio:  
Total harmonic distortion: Less than 0.0025% (at 1 kHz)  
Channel separation:  
Wow and flutter:  
Output level  
More than 94 dB (at 1 kHz)  
Less than measurable limit  
2.0Vrms (at 10 kohms)  
Accessories  
Remote control unit (RM-SX230EU)(XL-V230BK only) .............. 1  
Battery R03(UM-4)/AAA(24F) (XL-V230BK only) ....................... 2  
Audio cord ................................................................................. 1  
COMPU LINK cord .................................................................... 1  
AC POWER cord ....................................................................... 1  
Design and specifications subject to change without notice.  
Page 15  
 
VICTOR COMPANY OF JAPAN, LIMITED  
0397YMYMACJSC  
J
C
EN  
V
 

Intel Personal Computer LV19C Series User Manual
Jackson Model Vehicle Chemical Sanitizing Glasswasher Dishmachine Series User Manual
Jenn Air Microwave Oven JMC1116 User Manual
JVC Speaker System UX 5500R User Manual
JVC Stereo System VS DT2000R User Manual
JVC VCR LPT0678 001A User Manual
Kenmore Dishwasher 6307793 User Manual
Kenmore Vacuum Cleaner 11623512 User Manual
King Canada Saw KC 3007 User Manual
KitchenAid Mixer K45SS User Manual